TSN-800 Series

TSN-800 Series

H-STRUT Grip Lock Nuts With Top Spring are designed with specially formed teeth in the parallel channel recesses to grip the returned lip of the channel. The shearing action of the teeth assures positive locking of the H-STRUT channels to the fittings.

Submittal Sheets_TSN-800 Request Quote

Material

H-STRUT Grip Lock Nuts With Top Spring are manufactured from mild steel bars, and are case hardened to a depth of 0.003" to 0.005" after machining, conforming to ASTM A-576 GR1015. Selected sizes also available in Stainless Steel.

Finish

All H-STRUT Grip Lock Nuts and Hardware have an electro-galvanized finish (ASTM B-633), unless otherwise noted.

Ordering

On the H-STRUT Grip Lock Nuts, consult the selection table which shows the correct locking nut for each size channel. On the Hardware please specify the diameter or size required, and length where applicable.

Resistance to Slip Pull Out Strength
12 Gauge - 1652# (4) 12 Gauge - 1935 (4)#
14 Gauge - 1100# 14 Gauge - 1140#

Technical Information

Cat. No. Size Thd. Thk. Wt./100Pcs. Channel
TSN-800 1/4" 20 1/4" 6 All H-Strut
TSN-801 3/8" 16 3/8" 9 All H-Strut
TSN-802 1/2" 13 3/8" 9 All H-Strut
TSN-808 5/16" 18 3/8" 7 All H-Strut

TSN-800

H-STRUT: TSN800

POWERSTRUT: PSTG-1/4"

B-LINE: TN-224

SUPERSTRUT: CM100-1/4

TSN-801

H-STRUT: TSN801

POWERSTRUT: PSTG-3/8"

B-LINE: TN-228

SUPERSTRUT: CM100-3/8

TSN-802

H-STRUT: TSN802

POWERSTRUT: PSTG-1/2"

B-LINE: TN-225

SUPERSTRUT: CM100-1/2

TSN-808

H-STRUT: TSN808

POWERSTRUT: PSTG-5/16"

B-LINE: TN-223