758P

Protector 758P Complete Baseboard Heater

  • The Protector™ 758P is constructed with heavy gauge G-90 zinc clad galvanized steel and pre-coated with a durable, impact and moisture resistant white polyester finish on all surfaces.
  • The Protector series baseboard comes complete including 3/4" aluminum fin element, cover and 2 end caps.
  • Combined with our rugged 18 gauge front cover, the Protector 758P is the ideal choice for high moisture and heavy traffic areas such as bathrooms, laundry rooms and entrance foyers, as well as homes in coastal and lake communities.
  • The Protector 758P is engineered, designed and manufactured with the same quality and specifications as our popular 750 Heat-Base™ series to provide years of trouble free, safe, silent and economical heat distribution.
  • It comes packaged complete with two end caps and our standard 3/4" heat element.
  • Part number 67600 is for 3ft complete assembly heating system, please see table below for additional lengths available and part numbers.
  • Additional accessories sold separately, see Baseboard Accessories.

Request Quote

Specifications

Available Lengths (ft) Nominal Tube Size Finished Dimensions (H x W) Finish Weight (lbs/ft) Thickness Fin/ft Pieces/Carton Pieces/Skid
3, 4, 5, 6 3/4" Copper 2-1/8" x 2-1/2" Natural 2.5 0.008 54.5 1 72

HEATING CAPACITIES, BTU PER HR PER LIN. FT. 65° ENTERING AIR TEMPERATURE

Nom. Tube Size Water Rate GPM Hot water ratings
Average Water Temperature
90° 100° 110° 120° 130° 140° 150° 160° 170° 180° 190° 200° 210° 220° 230° 240°
3/4" Copper 4 70* 110* 170* 230* 280* 340* 410 480 550 610 690 760 820 900 970 1,040
1 70* 110* 160* 210* 270* 330* 390 450 520 580 650 720 780 850 920 980
  • Ratings at 140°F and lower temperatures determined by multiplying 150°F rating by the applicable reduction factor.
  • All the above ratings are based on active length, which is 3" less than total length, and includes a 15% addition for heating effect.
  • Ratings: Heating capacities are listed in Table 1 for two flow rates: 1 GPM and 4 GPM.
  • The use of ratings at 4 GPM is limited to installations where the water flow rate through the baseboard unit is equal to or greater than 4 GPM.
  • Where the water flow rate through the baseboard is not known, the ratings at the standard flow rate of 1 GPM must be used.

FACTORS FOR RATINGS AT FLOW OTHER THAN STANDARD AND PRESSURE DROP VALUES

Rate of Flow GPM 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0
Factor 1.000 1.016 1.028 1.038 1.045 1.051 1.057 1.062 1.067 1.074
Pressure Drop 3/4" Tube Mill inches per ft. 47 96 157 230 320 420 525 650 775 1060
  • Note: If the calculated water flow rate through a baseboard unit in a completely designed hot water heating system is greater than the standard flow rate (1 GPM), the rating of that unit may be increased by multiplying the standard rating at 1 GPM by the factor shown for the calculated flow rate.

Technical Information

Part # Model/Product Name Description Length (ft.) Weight (lbs/ft.) Pieces/Carton Pieces/Skid
67600 Protector 758P Complete Baseboard complete with 3/4" aluminum fin element, cover and 2 end caps 3
1 72
67610 Protector 758P Complete Baseboard complete with 3/4" aluminum fin element, cover and 2 end caps 4 2.5 1 72
67615 Protector 758P Complete Baseboard complete with 3/4" aluminum fin element, cover and 2 end caps 5 2.5 1 72
67620 Protector 758P Complete Baseboard complete with 3/4" aluminum fin element, cover and 2 end caps 6 2.5 1 72
  • Note: Copper tube element only also available upon request in 1/2" with 2-1/8" x 2-1/4" aluminum fins (4 per box)
Home/Catalog/Products/Baseboard Heating/758P